How to Plant Containerized Trees
How to Plant Containerized Trees?

Normally, trees purchased from tree nurseries and beds come in containers such as plastic paper bags. Therefore, they are carried with their containers up to the point of transplanting. Mostly, many people find it hard to successfully transplant the containerized trees with eventual dryness being the results. However, with the following steps, you can easily succeed in this task:

How to Plant Containerized Trees

1) Dig a hole at the area where the tree should be planted. Ensure that the hole is 3 times wider that the container holding the tree. This will give room for the outward growth of roots. Ensure that all the soil removed from hole is kept aside for refilling.

2) Remove the tree from the container with care to keep the roots attached to the soil. Preferably, water the container and allow it sometime before removing the tree. This will make it possible for the soil to move out together with the roots.

3) If roots have matted at the base, loosen them in order to ensure vertical growth. You may cut the overgrown roots in order to discourage horizontal growth of roots which does not provide maximum support for a tall growing tree.

4) Place the tree from the container into the hole. Ensure that the tree is centrally placed in order to allow an ample space for roots’ growth. Avoid planting your tree in a deep location. Instead, place some soil on the surface of the hold. This will leave space for the tree trunk to remain above the soil surface.

How to Plant Containerized Trees

5) Fill the space left with soil. Ensure that there is no space left while refilling in order to prevent soil collapse during rains or during watering periods. Preferably, you may start filling the space with the soil that was removed from the top layer during hole-digging. This will supply the tree with the nutrients which are normally bulk within the top soil. Fill the soil until it touches the collar of the roots.

6) Design a water holding surface on the collar of the roots. This will create a space to hold water after watering is done. After watering for the first time, apply mulching all around the tree. Normally, dry leaves or grass can be used for mulching since they effectively cover the space preventing water evaporation during the sunny weathers. The mulch should be about 4 inches in depth.

7) The soil and mulch covering the tree on the soil surface should be kept wet most of the times. However, avoid too much water since water logging prevents the tree from growing healthy. The tree should be watered regularly after planting preferably after every two days. Eventually, watering may be regulated until none is done after a period of one year. You may use dripping watering method to keep the area moist regularly.


Planting new trees should be done using manure and humus rich soil. Avoid using fertilizers and chemicals to prevent drying of the tree or its parts at young age. Keep the tree surface moist especially in the early stages after planting in order to aid the tree roots in the absorption of nutrients and water for photosynthesis. This will ensure fast growth of the tree.

Which Brand Is the Best for Touchless Kitchen Faucet
Which Brand Is the Best for Touchless Kitchen Faucet?

The invention of the touchless kitchen faucets has introduced hygiene, simplicity, and power efficiency in the kitchen. However, touchless kitchen faucets have come in different brands which functions differently. Therefore, you need to select the best brand among the available brands in the market.

The Moen Touchless Kitchen Faucets

The Moen Faucets make the best type of touchless kitchen faucets among the available brands in the market today. These faucets come in different types such as Haysfield, Arbor, Delaney, and Brantford. The following are some reasons why you should choose the Moen Touchless faucets:

1) Simple Installation

Which Brand Is the Best for Touchless Kitchen Faucet

Normally, the Moen touchless faucets come with all the tools, systems, and parts which need to be used during installation. Therefore, you do not need additional tools to make your installation process effective.

At the same time, you can use the manual that accompanies the faucets during the installation process. With the tools and the manual, you can do the installation task by yourself without relying on the help of a plumber.

2) Spot Resist to Prevent Hard Water Staining

Hard water normally leaves stains on the materials and pipes through which its passes. If you have experienced previous faucets, you might have learnt about the unavoidable staining associated with them. In time, these faucets are blocked due to deposition of clogging elements.

However, this issue can be solved through selecting Moen touchless kitchen faucets. These faucets are enhanced with the ability to resist staining. As a result, you can use your faucet for a long time without necessarily repairing or replacing it.

3) They are More Flexible

Moen touchless kitchen faucets feature swivel motion. This motion helps in controlling the point at which the faucet directs the water. At the same time, they are fitted with pull down wand system which ensures easy movement of water down to the sink.

The pull down wand is also known as pull-down spray head. With it, you do not need to install a separate sprayer for separate water outlet. This makes the faucets easy to use while performing different chores in the kitchen.

4) Highly Sensitive Motion Sensor

Which Brand Is the Best for Touchless Kitchen FaucetIf you are performing different chores in the kitchen such as chopping meat or watching over the cooking food, you might find it hard to operate your faucet. Some touchless faucets are less sensitive. Thus, you must draw your hand near them for a long time in order to operate them.

The Moen touchless kitchen faucets are highly sensitive. You do not require to be near them or to spend a lot of time in order to operate them. By moving your hand near the faucet for less than 3 seconds, the faucet will automatically respond.

5) Pause Button

This is fitted on the spray wand. The pause button is not always available in other faucets. It enables the user to operate the spray wand without water splashing off when moving the hose out.


The touchless kitchen faucets have been embraced due to their ability to ensure ultimate hygiene in the kitchen. The Moen touchless kitchen faucets are fitted with several additional features which makes them easy to operate and more durable than other faucets.

Ten Eco-Friendly Ways to Renovate Your Home
Ten Eco-Friendly Ways to Renovate Your Home

There are numerous ways to enhance the aesthetic value of your home. Most eco-friendly ways have been voted as the best methods mostly because they are cost efficient. They are also effective in reducing the rate of environment pollution.


When pulling down certain rooms or parts of the house, do not demolish everything. The rooms might be in a bad state. However, these still might be some things in the room that are in good condition. Therefore, with the help of an expert, identify the items that can be used. Remove them before hand. These things will help you to save on the cost of buying new materials.

Reclaimed wood

Ten Eco-Friendly Ways to Renovate Your Home

One can use reclaimed woods to make very sturdy and beautiful kitchen tops or the front porch benches. The wood gives the home a beautiful appearance without costing you so much.

Recycled Glass

Recycled glass can be used to make counter-tops. This is a great way to save the environment from this non-bio-degradable material to make your look have a chic appearance. The glass gives the place a classy look while at the same time is pocket-friendly compared to other materials.

Pre-Owned Items

Ten Eco-Friendly Ways to Renovate Your Home

When remodelling your house, you might need to restock some items. While going for a new item might be your first choice, you could also consider pre-owned items. Going for a pre-owned item might enable you to get a classic and expensive piece at a relatively low price. This helps you to save a few bucks, get a vintage piece and also save the environment from possible pollution if the item was just dumped.

Sell Unwanted Items

Some rooms in the house are usually congested with items you no longer use or need. Just like you can get pre-owned items, you can also put up these items for sale. According to, this could help you get a few bucks to support you in renovating the house.

Energy Saving Appliances

Being eco-friendly means that you also look for ways to conserve the energy you use in the house. This could be by getting electricity equipment consuming less power. It is also important to note that you can save energy by making sure that the ceiling fans are switched off when one is not in the room.

Salvaged metal

Just like the case in reclaimed wood, salvaged metal can be used in the home reconstruction. One can use metal with rust; sometimes the surface is painted to make it more appealing.

Bamboo over Hardwood

Ten Eco-Friendly Ways to Renovate Your HomeFloors can be made of hardwood or bamboo. They both look similar in appearance, and the durability is more or less the same. However, bamboo grows much faster than hardwood trees. Therefore, you will be saving the environment more when using the bamboo floors.

Use of Low-VOC Paint

VOC volatile organic Compounds’ are harmful to your health in the long term. Therefore, one can use paint which is free of VOC or has very little VOC.


One can utilize the sunlight by opening the windows to help in regulating the temperature of the house. One can also use the solar power to help with the water heating, home lighting and other activities In the house.


Eco-friendly home constructions and reconstructions are becoming more popular. This because the need to save the world from degradation is becoming dire. Therefore, people are likely to take to more eco-friendly homes in a quest to save the environment and at the same time save money doing it.

Traveling to Blue Lagoon (Iceland)
Traveling to Blue Lagoon (Iceland): An Environmentally Friendly Spot

The Blue Lagoon, Iceland is a few miles away from the Reykjavik International Airport. The lagoon is a part of the Svartsengi Resource Park in Iceland. It has a spring producing hypnotizing blue water that is heated from the geothermal energy produced underground.

The Blue Lagoon receives over 500,000 visitors annually. These visitors attend the place in order to soak themselves in in the hot water enriched with natural silica, sulfur, and algae. The hotness of the water as well as the mineral elements makes it suitable for all skins. Before planning your trip you should read this Guide on Everything You Need to Know Before Visiting The Blue Lagoon.

Why Should You Prefer Blue Lagoon?

Traveling to Blue Lagoon (Iceland)

The Blue Lagoon has grown famous as it has emerged as an environmentally friendly place. Despite the high number of visitors who are interested in visiting the area, it remains safe for everyone and for the environment. The following are some reasons contributing to this:

1) Free from Congestion

Over half a million visitors attend the Blue Lagoon during different times of the year. However, the area is always free from congestion based on the people soaking themselves on daily basis. Thus, this allows an ample time for cleansing and detoxification of the water before it is used again by other visitors.

2) Maintenance of the Eco-cycle

About 1 kilometer beneath the surface of the Blue Lagoon, the temperatures are at 200oC. At the same time, there are different paths channeling the water to the underground and to the surface. Throughout the cycle, the water is heated naturally before it is available on the surface.

Blue Lagoon maintains the cycle through preventing any interference of the cycle among the worker or the visitors. Therefore, the area has been able to remain as natural as it was during its discovery.

3) Chemicals Usage

Traveling to Blue Lagoon (Iceland)

The water in the Blue Lagoon is enriched with algae, silica, and sulfur which are essential for healthy skin. However, certain chemicals such as fluorine, carbon dioxide, sodium, and potassium are added to regulate the nature of the water. This helps in preventing the blockage of channels by hard water elements. At the same time, it keep the water germ-free for human usage.

4) The Architecture and Design of Blue Lagoon

The Blue Lagoon spa and clinic were both designed by Basalt architects. They are made from Icelandic construction materials such as moss and stones. These material shows respect for environment and the desire to retain the geological history associated with the area. Parts such as lava walk, natural maze, and natural rocks used in construction represents little influence of man to the environment and its appearance.

5) The Blue Flag

The blue flag is issued UNEP to organizations and firms associated with utmost tendency of environmental conservation. It is an environmental certification to firms or organizations associated with maintenance of the quality of coastal or inland water.

6) Maintenance of Water Quality

Normally, the Blue Lagoon sends water samples to laboratory which are public or officially authorized. This helps in detecting the traces of bacteria and other types of germs that may be available in water. Therefore, effective control measures can be devised and implemented to control any incidence detected.


The Blue Lagoon is a destination for many people from different parts of the world and at different seasons of the year. However, do not worry about going to soak yourself in a place where different people always do the same. Everything is well taken care of to ensure your safety and good health.

Interesting Facts about the World Environment Day
Interesting Facts about the World Environment Day (WED)

The World Environment Day (WED) is held annually on the 5th of June. The day’s main aim is to increase positive awareness about the need to care for the environment and the nature of the planet earth.

The activities done in the day are led by United Nations Environmental Programme (UNEP). These activities seek to integrate people from different parts of the world in caring about the environment.

Facts about the World Environment Day

Interesting Facts about the World Environment Day1) History

The WED was launched in 1972 during a United Nations Conference on the Human Environment event. The main aim was to solely devote the day for the environmental conservation activities in a bid to create worldwide awareness on the need to conserve the environment.

2) Children Efforts

Many children have been involved in different WED activities such as afforestation programmes in Nepal, campaigns against tree-cutting and environmental cleanliness in Ghana, and Project Green Oman in Oman which was founded by H. Sudev who eventually won a WED award.

3) World Environment Day Events

A couple of events are held in different places to honor the day through leaving an impact in the environment, for example, the Eco Action Day in Singapore in 2007 which aimed at discouraging the use of energy in workplaces in a bid to ensure energy efficiency. Again, the day notices that there is a need to create to promote a green working environment through the use of green products.

4) The World Environment Day Anthem

The anthem is known as “Earth Anthem”. It was composed by poet-diplomat by name Abbay K in 2013. It is made up of eight different languages which unite communities from different parts of the world. The anthem was launched during an Indian Council of Cultural Relations event which was held in New Delhi, India. It is a strong symbol of the WED.

5) Themes of the World Environment Day

Interesting Facts about the World Environment DayWorld Environment Day has a different theme which guides its actions each year. The day has been associated with a couple of themes in the past. These themes include: “To Prohibit Illegal Trade of Threatened” in 2016, “Seven Billion Dreams: One Planet, Consume with Care” in 2015, “Small Islands and Climate Change” in 2014, “Think. Eat. Save” in 2013, and “Does It Include You?” in 2012.

6) Recent Hosting

The most recent World Environment Day was hosted in Angola in 2016. The theme of the day was “To Prohibit Illegal Trade of Threatened”. The main action of the day was to prohibit the rampant poaching and illegal trade of wild animal products such as ivory removed from elephants and rhinos.

Poaching and illegal trade of wildlife products is rampant in Africa, Asia, and other parts of the world. Therefore, this day aimed at creating awareness on the need to help governments and world organizations in preventing illegal trade in all the parts of the world.


Since its launching, the World Environment Day (WED) has largely contributed in creating awareness on the need to conserve environment in different parts of the world. The day has made it possible for UNEP to combine efforts with nations, organizations, and even individuals in the environment conservation.